SHE2超高扭矩系列齿轮箱

    SHE2 High Torque Series Gear Box

    箱体

    箱体独家接纳QT400—18质料一体、厚壁设计，吸震整体箱体，完全吸收挤出历程中的轴向力，保证主机的高稳固清静稳性。箱内波纹外貌的设计，有利于降低噪音，散热及零件的润滑。

    The housing is exclusively made of QT400-18 materials wholly, designed with thick wall, which can absorb the axial force during extrusion completely and ensure the high stability and stationarity of the gear unit. The corrugated surface of the internal housing is designed to reduce noise, promote heat dissipation and increase lubricity for parts.

    齿轮设计

    奇异的齿轮25°压力角设计, AGMA 010以上的精度加工,17CrNiMo6,20CrMnMo的齿轮质料,齿轮奇异的修形和参数优化,使gai机型具有极强的抗过载能力同时又能保证低噪音和高效率。

    The unique design of 25 degree pressure angle of gears, machining precision above AGMA 010 gear standard and used lubrication material of 17CrNiMo6,20CrMnMo, with unique shape modification and parameter optimization to gears, enable SHE series have a strong anti-overload capacity and make sure low noise and high efficiency at the same time.

    SHE2系列承载能力提升图

    箱体轴承

    齿轮箱接纳天下一流的FAG、 TIMKEN 、 SKF 轴承，能更快、更准确地调整轴承轴向间隙保证最长的轴承使用寿命。

    The gearboxes are equipped with bearings of world-class brand such as FAG, TIMKEN and SKF, which can adjust the bearing axial clearance more quickly and correctly to ensure the longest bearing service life.

    推力轴承

    推力轴承接纳天下一流的SKF 、 FAG 轴承，更强的机械性能和散热性，保证最高的轴向承载可靠性和无故障率。

    Thrust bearings adopt world-class brand of SKF and FAG, with stronger mechanical properties and heat dissipation, ensuring the highest axial bearing reliability and zero failure rate.

    油封

    所有接纳入口 SIMRIT 、 SKF 油封，齿轮箱的高、低速轴均接纳双油封形式，彻底杜绝漏油可能性。

    Imported oil seals of brand SIMRIT and SKF are fully used, double oil seals are used in all the high speed shaft and low speed shaft inside the gearboxes, which eliminate the possibility of oil leakage completely .

    传动速比

    速比—新型SHE2齿轮箱为2级传动设计,其适用速比最大到22.4。

    Gear ratio -- The new SHE2 gearbox is designed as 2-stage transmission device, with maximum applicable ratio of 22.4.

    螺杆毗连

    螺杆毗连—可an尺度要求选用 GB /T3478.1—2008的渐开线优化，也可以选用 GB /T1095的180°双jian槽。DIN5480渐开线花jian、 GB /T1144的矩形花jian等。

    Screw connecting - The involute optimization of GB/T3478.1-2008 can be selected according to the standard requirements. The 180 degree double keyway of GB /T1095 , DIN5480 involute spline and GB /T1144 rectangular spline and so on can also be selected.

    工况系数

    工况系数—传输功聅hi芭ぞ厥且谰莨た鱿凳1来思量的，客户可以an详细的适用状态来选择合适的工况系数，为选择相宜的齿轮箱,新宝会建议选择工况为1.5— 2.0之间的齿轮箱型号。

    Service factors(SF) - The transmission power and torque are considered on the condition of   the service factor of 1. Customers can select the appropriate service factors according to the specific applicable conditions. In order to select a suitable gearbox, we suggest the gearboxes with service factor between 1.5 and 2.0 can be chosen.